MacMaxe ULKA Model E Type EFP5 – Replacement Pump Compatible with Breville Espresso Machine – Solenoid Vibratory Water…

Description

Model E, Type EFP5, ~ 120V, 60Hz 52W.

• fittings ø 1/8″- ø 6 mm;
• pressure max 15 bar;
• water temperature max 25°C;
• integrated diode (1N 4007P);
• lead connector 6.3×0.8 mm;

All pumps are designed and tested the use of water as fluid.
Pump will have to have water inside after disposing of red cap off of water inlet.
A brown stain is also visible around the water inlet, it’s normal.
We do not recommend to stock the pumps for long time,
especially in high temperature storage house and in particular
for pumps without water inside.

Sometimes pumps will develop an airpocket in shipping or from storage.
TO WORK PROPERLY, PUMP MUST HAVE WATER INSIDE .
EMPTY PUMP WILL MAKE A LOUD BUZZING NOISE.
To get rid of the airpocket, use a syringe filled with water and push
the water through the pump. Be sure the other end is clear and drained,
or connected within machine and air can escape the other side.

The thread connection G 1/8“ of the plastic pump outlet isn’t subject
to the norm UNI ISO 228/2. The seal isn’t guaranteed by the thread.
In fact the hydraulic seal should be assured
by the seal OR 2025 Ø 1.76 x 6.07 mm. (Seal include in the package)

Replacement Pump for Breville Espresso Machine:

• 800ESXL
• BES820XL
• BES830XL
• BES840XL
• BES860XL
• BES870XL
• BES900XL
• BES920XL
• BES980XL
• BES990
• BES500
• BES878

Be sure this fits by entering your model number.
ULKA Model E, Type EFP5 ~ 120V, 60Hz 52W
Self priming at 0 bar, Integrated diode (1N 4007P), Thermal cutout pocket, Pressure max 15 bar.
Compact solution for high pressure and low drift applications.
Full detailed electrical and hydraulic inspection
Replacement Pump for Breville 800ESXL, BES820XL, BES830XL, BES840XL, BES860XL, BES870XL, BES900XL, BES920XL, BES980XL, BES990, BES500, BES878